+46 (0) 42 72460

Ytron "XC" Xcyclon



The Xyclon-Principle


Powders and compounds with a tendency to form lumps are continuously incorporated in-line and effectively dispersed.

This means that even on a single pass, very high concentrations can be achieved.


The first stage in the reactor head creates a strong negative pressure and sucks the solid phase in. Immediately after contact with the liquid phase, this premix of the 2 phases is impelled against the XC impact chamber plates where the liquid is absorbed into the powder phase.


The second Stage discharges the homogeneously wetted product.



  • Complete wetting out of the powders in a single pass. Examples : Caseinates, Pectin, CMC, Xantan gum, PVA.
  • Concentrations up to 40% are possible in a single pass.
  • No air intrainment other than the occluded air in the powder phase.
  • Batch time reduced to the minimum.
  • Higher product yield due to the intensive wetting of the powders
  • Low intensity mixing due to high impact frequency instead of high shear.
  • Feeding from bigbag or silo is also possible.
  • CIP and SIP.

Process exampel

Copyright - 2018           JP proces AB Box 50, 267 02 BILLESHOLM, Visiting address: Spinngatan 2, 267 73 Billesholm Sweden.